Skip to content

Re-Factored CR6 Community Touchscreen Firmware - Release Candidate 61F_RC_260522_v1
Compare
Choose a tag to compare
@Thinkersbluff Thinkersbluff released this 28 May 03:10
· 94 commits to extui since this release
61F_RC_260522_v1
d51df8e
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Verified
Learn about vigilant mode.

PLEASE READ THE README FILE BEFORE FLASHING THIS FIRMWARE TO YOUR PRINTER.

Flashing the DWIN_SET in this release installs a TouchScreen that works with the CF6.1-Final motherboard firmware and runs on any version of DGUS2 (v2.0 or higher.)

If you have DGUS2 v4.5 flashed to your display, you should flash this DWIN_SET instead of the one bundled with the motherboard firmware.
If you already have the CR6Community Firmware running on DGUS2 v3.5 on your printer, then you do not need to flash this firmware.

NOTE: The Load screen and the Setup->Info page will confirm the release number you have flashed, which should match the release number in the filename and in the README.txt file.

NEW AT THIS RELEASE:
User feedback in issue #83 lead to the discovery that two Toggle buttons were not displaying, due to a configuration error in the DGUS project file. That issue is now resolved.
Added a new button to the Setup Control Screen, to also be able to access the Leveling Settings Screen from the Setup Control Screen.

Other miscellaneous edits made at this release are:

Nudged the buttons on the Setup Control Screen, to make room for the new button
Deleted a temporary jpg file not intended to be part of the release.

We have designated this DWIN_SET as 61F_RC_260522_v1.

Assets 3
Loading