diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 2d469dd797..25ce49b1cb 100755
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1659,7 +1659,7 @@
  * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
-#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
+#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING, KNUTWURST_KLICKY)
   #define PROBE_MANUALLY
 #endif
 
@@ -1736,21 +1736,24 @@
  * Magnetically Mounted Probe
  * For probes such as Euclid, Klicky, Klackender, etc.
  */
-// #define MAG_MOUNTED_PROBE
-#if ENABLED(MAG_MOUNTED_PROBE)
-  #define PROBE_DEPLOY_FEEDRATE (133 * 60)  // (mm/min) Probe deploy speed
-  #define PROBE_STOW_FEEDRATE   (133 * 60)  // (mm/min) Probe stow speed
-
-  #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
-  #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
-  #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-  #define MAG_MOUNTED_DEPLOY_4 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-  #define MAG_MOUNTED_DEPLOY_5 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
-  #define MAG_MOUNTED_STOW_1   { PROBE_STOW_FEEDRATE,   { 245, 114, 20 } }  // Move to dock
-  #define MAG_MOUNTED_STOW_2   { PROBE_STOW_FEEDRATE,   { 245, 114,  0 } }  // Place probe beside remover
-  #define MAG_MOUNTED_STOW_3   { PROBE_STOW_FEEDRATE,   { 230, 114,  0 } }  // Side move to remove probe
-  #define MAG_MOUNTED_STOW_4   { PROBE_STOW_FEEDRATE,   { 210, 114, 20 } }  // Side move to remove probe
-  #define MAG_MOUNTED_STOW_5   { PROBE_STOW_FEEDRATE,   {   0,   0,  0 } }  // Extra move if needed
+#if ENABLED(KNUTWURST_KLICKY)
+  // @see https://www.printables.com/model/489398-anycubic-mega-klicky-probe
+  #define MAG_MOUNTED_PROBE
+  #if ENABLED(MAG_MOUNTED_PROBE)
+    #define PROBE_DEPLOY_FEEDRATE (133 * 60)  // (mm/min) Probe deploy speed
+    #define PROBE_STOW_FEEDRATE   (133 * 60)  // (mm/min) Probe stow speed
+
+    #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 176, 0,  0 } }    // Move to front dock & attach probe
+    #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 176, 0, 20 } }    // Move probe off dock
+    #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0, 0,  0 } }  // Extra move if needed
+    #define MAG_MOUNTED_DEPLOY_4 { PROBE_DEPLOY_FEEDRATE, {   0, 0,  0 } }  // Extra move if needed
+    #define MAG_MOUNTED_DEPLOY_5 { PROBE_DEPLOY_FEEDRATE, {   0, 0,  0 } }  // Extra move if needed
+    #define MAG_MOUNTED_STOW_1   { PROBE_STOW_FEEDRATE,   { 176, 0, 20 } }    // Move right above the dock
+    #define MAG_MOUNTED_STOW_2   { PROBE_STOW_FEEDRATE,   { 176, 0,  0 } }    // Move probe into dock
+    #define MAG_MOUNTED_STOW_3   { PROBE_STOW_FEEDRATE,   {  50, 0,  0 } }  // Side move to remove probe
+    #define MAG_MOUNTED_STOW_4   { PROBE_STOW_FEEDRATE,   {   0, 0,  0 } }  // Extra move if needed
+    #define MAG_MOUNTED_STOW_5   { PROBE_STOW_FEEDRATE,   {   0, 0,  0 } }  // Extra move if needed
+  #endif
 #endif
 
 // Duet Smart Effector (for delta printers) - https://bit.ly/2ul5U7J
@@ -1849,7 +1852,11 @@
   #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.8 }
 #endif
 
-#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
+#if ENABLED(KNUTWURST_KLICKY)
+  #define NOZZLE_TO_PROBE_OFFSET  { 0, -25, -7 }
+#endif
+
+#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING, KNUTWURST_KLICKY)
   #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
 #endif
 
@@ -1859,6 +1866,8 @@
 
 #if ENABLED(KNUTWURST_CHIRON)
   #define PROBING_MARGIN 15
+#elseif ENABLED(KNUTWURST_KLICKY)
+  #define PROBING_MARGIN 20
 #else
   #define PROBING_MARGIN 35
 #endif
@@ -2477,7 +2486,7 @@
  *   leveling in steps so you can manually adjust the Z height at each grid-point.
  *   With an LCD controller the process is guided step-by-step.
  */
-#if EITHER(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
+#if ANY(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING, KNUTWURST_KLICKY)
   // #define AUTO_BED_LEVELING_3POINT
   // #define AUTO_BED_LEVELING_LINEAR
   #define AUTO_BED_LEVELING_BILINEAR
@@ -2485,7 +2494,7 @@
   // #define MESH_BED_LEVELING
 #endif
 
-#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
+#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING, KNUTWURST_KLICKY)
   // #define AUTO_BED_LEVELING_3POINT
   // #define AUTO_BED_LEVELING_LINEAR
   // #define AUTO_BED_LEVELING_BILINEAR
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 8c30948dd3..f3a05e45d0 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -164,7 +164,7 @@
 #elif MB(TRIGORILLA_13)
   #include "ramps/pins_TRIGORILLA_13.h"         // ATmega2560                             env:mega2560
 #elif MB(TRIGORILLA_14, TRIGORILLA_14_11)
-  #include "ramps/pins_TRIGORILLA_14.h"         // ATmega2560                             env:mega2560 env:MEGA_1G env:MEGA_1G_TMC env:MEGA_1G_BLT_10 env:MEGA_1G_BLT_11 env:MEGA_1G_TMC_BLT_10 env:MEGA_1G_TMC_BLT_11 env:MEGA env:MEGA_TMC env:MEGA_BLT_10 env:MEGA_BLT_11 env:MEGA_TMC_BLT_10 env:MEGA_TMC_BLT_11 env:MEGA_S env:MEGA_S_TMC env:MEGA_S_BLT_10 env:MEGA_S_BLT_11 env:MEGA_S_TMC_BLT_10 env:MEGA_S_TMC_BLT_11 env:MEGA_S_DGUS env:MEGA_S_DGUS_TMC env:MEGA_S_DGUS_BLT_10 env:MEGA_S_DGUS_BLT_11 env:MEGA_S_DGUS_TMC_BLT_10 env:MEGA_S_DGUS_TMC_BLT_11 env:MEGA_X env:MEGA_X_TMC env:MEGA_X_BLT_10 env:MEGA_X_BLT_11 env:MEGA_X_TMC_BLT_10 env:MEGA_X_TMC_BLT_11 env:MEGA_X_DGUS env:MEGA_X_DGUS_TMC env:MEGA_X_DGUS_BLT_10 env:MEGA_X_DGUS_BLT_11 env:MEGA_X_DGUS_TMC_BLT_10 env:MEGA_X_DGUS_TMC_BLT_11 env:MEGA_P_DGUS env:MEGA_P_DGUS_TMC env:MEGA_P_DGUS_BLT_10 env:MEGA_P_DGUS_BLT_11 env:MEGA_P_DGUS_TMC_BLT_10 env:MEGA_P_DGUS_TMC_BLT_11 env:4MAXP2 env:4MAXP2_TMC env:4MAXP2_BLT_10 env:4MAXP2_BLT_11 env:4MAXP2_TMC_BLT_10 env:4MAXP2_TMC_BLT_11 env:4MAXP2_DGUS env:4MAXP2_DGUS_TMC env:4MAXP2_DGUS_BLT_10 env:4MAXP2_DGUS_BLT_11 env:4MAXP2_DGUS_TMC_BLT_10 env:4MAXP2_DGUS_TMC_BLT_11
+  #include "ramps/pins_TRIGORILLA_14.h"         // ATmega2560                             env:mega2560 env:MEGA_1G env:MEGA_1G_TMC env:MEGA_1G_BLT_10 env:MEGA_1G_BLT_11 env:MEGA_1G_TMC_BLT_10 env:MEGA_1G_TMC_BLT_11 env:MEGA env:MEGA_TMC env:MEGA_TMC_KLICKY env:MEGA_BLT_10 env:MEGA_BLT_11 env:MEGA_TMC_BLT_10 env:MEGA_TMC_BLT_11 env:MEGA_S env:MEGA_S_TMC env:MEGA_S_TMC_KLICKY env:MEGA_S_BLT_10 env:MEGA_S_BLT_11 env:MEGA_S_TMC_BLT_10 env:MEGA_S_TMC_BLT_11 env:MEGA_S_DGUS env:MEGA_S_DGUS_TMC env:MEGA_S_DGUS_BLT_10 env:MEGA_S_DGUS_BLT_11 env:MEGA_S_DGUS_TMC_BLT_10 env:MEGA_S_DGUS_TMC_BLT_11 env:MEGA_X env:MEGA_X_TMC env:MEGA_X_BLT_10 env:MEGA_X_BLT_11 env:MEGA_X_TMC_BLT_10 env:MEGA_X_TMC_BLT_11 env:MEGA_X_DGUS env:MEGA_X_DGUS_TMC env:MEGA_X_DGUS_BLT_10 env:MEGA_X_DGUS_BLT_11 env:MEGA_X_DGUS_TMC_BLT_10 env:MEGA_X_DGUS_TMC_BLT_11 env:MEGA_P_DGUS env:MEGA_P_DGUS_TMC env:MEGA_P_DGUS_BLT_10 env:MEGA_P_DGUS_BLT_11 env:MEGA_P_DGUS_TMC_BLT_10 env:MEGA_P_DGUS_TMC_BLT_11 env:4MAXP2 env:4MAXP2_TMC env:4MAXP2_BLT_10 env:4MAXP2_BLT_11 env:4MAXP2_TMC_BLT_10 env:4MAXP2_TMC_BLT_11 env:4MAXP2_DGUS env:4MAXP2_DGUS_TMC env:4MAXP2_DGUS_BLT_10 env:4MAXP2_DGUS_BLT_11 env:4MAXP2_DGUS_TMC_BLT_10 env:4MAXP2_DGUS_TMC_BLT_11
 #elif MB(RAMPS_ENDER_4)
   #include "ramps/pins_RAMPS_ENDER_4.h"         // ATmega2560                             env:mega2560
 #elif MB(RAMPS_CREALITY)
diff --git a/ini/i3_mega.ini b/ini/i3_mega.ini
index 7afb458e20..db4f481476 100755
--- a/ini/i3_mega.ini
+++ b/ini/i3_mega.ini
@@ -79,6 +79,15 @@ build_src_filter  = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
 
+[env:MEGA_TMC_KLICKY]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+build_src_filter  = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_KLICKY
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
+
 [env:MEGA_BLT_10]
 platform          = atmelavr
 board             = megaatmega2560
@@ -138,6 +147,15 @@ build_src_filter  = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
 
+[env:MEGA_S_TMC_KLICKY]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+build_src_filter  = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_KLICKY
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
+
 [env:MEGA_S_BLT_10]
 platform          = atmelavr
 board             = megaatmega2560
diff --git a/platformio.ini b/platformio.ini
index e9f34616f5..33be518418 100755
--- a/platformio.ini
+++ b/platformio.ini
@@ -27,12 +27,14 @@ default_envs =
   MEGA_1G_TMC_BLT_11
   MEGA
   MEGA_TMC
+  MEGA_TMC_KLICKY
   MEGA_BLT_10
   MEGA_BLT_11
   MEGA_TMC_BLT_10
   MEGA_TMC_BLT_11
   MEGA_S
   MEGA_S_TMC
+  MEGA_S_TMC_KLICKY
   MEGA_S_BLT_10
   MEGA_S_BLT_11
   MEGA_S_TMC_BLT_10