Merge pull request #531 from stklcode/fix/regression-2122

revert some unintentional config changes from 2.1.2.2 merge

Author: knutwurst

Marlin/Configuration.h

@@ -1605,7 +1605,7 @@
  *
  * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  */
-//#define S_CURVE_ACCELERATION
+#define S_CURVE_ACCELERATION
 
 //===========================================================================
 //============================= Z Probe Options =============================

Marlin/Configuration_adv.h

@@ -1523,12 +1523,12 @@
 #endif // HAS_DISPLAY || DWIN_LCD_PROUI
 
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
-//#define SET_PROGRESS_MANUALLY
+#define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
   #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
   #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
-  //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
-  //#define M73_REPORT                    // Report M73 values to host
+  #define SET_INTERACTION_TIME            // Add 'C' parameter to set time until next filament change or other user interaction
+  #define M73_REPORT                      // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)
     #define M73_REPORT_SD_ONLY            // Report only when printing from SD
   #endif
@@ -1575,7 +1575,7 @@
   //#define SD_IGNORE_AT_STARTUP            // Don't mount the SD card when starting up
   //#define SDCARD_READONLY                 // Read-only SD card (to save over 2K of flash)
 
-  //#define GCODE_REPEAT_MARKERS            // Enable G-code M808 to set repeat markers and do looping
+  #define GCODE_REPEAT_MARKERS              // Enable G-code M808 to set repeat markers and do looping
 
   #define SD_PROCEDURE_DEPTH 1              // Increase if you need more nested M32 calls
 
@@ -1655,7 +1655,7 @@
    *  - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
    *  - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
    */
-  //#define SDCARD_SORT_ALPHA
+  #define SDCARD_SORT_ALPHA
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
@@ -2778,7 +2778,7 @@
                                                   //   Filament can be extruded repeatedly from the Filament Change menu
                                                   //   until extrusion is consistent, and to purge old filament.
   //#define ADVANCED_PAUSE_RESUME_PRIME        0  // (mm) Extra distance to prime nozzle after returning from park.
-  //#define ADVANCED_PAUSE_FANS_PAUSE             // Turn off print-cooling fans while the machine is paused.
+  #define ADVANCED_PAUSE_FANS_PAUSE               // Turn off print-cooling fans while the machine is paused.
 
                                                   // Filament Unload does a Retract, Delay, and Purge first:
   #define FILAMENT_UNLOAD_PURGE_RETRACT       13  // (mm) Unload initial retract length.