Skip to content

Leaks Test (BETA)

Jump to bottom
Gavin Fielder edited this page May 7, 2019 · 1 revision

On: -k ; Off: -K Default off.

When this option is on, a leaks test command will run after all tests are completed. This disables fork mode. Leaks test will not run when any test segfaulted or otherwise terminated abnormally (as in this case leaks can come from PFT).

The default leaks testing method is to call leaks(1) via system(3). You can specify a different method with the LEAKS_TEST_CMD option in the Configuration Options.

This feature is still being tested. Do not rely on it completely.

Clone this wiki locally