fluidd.cfg

######################################
## This is a custom config for 
## fluidd to enable options required
## by it
######################################


######################################
## Options required by fluidd
######################################
[virtual_sdcard]
path: ~/gcode_files
[display_status]
[pause_resume]

######################################
## Custom macros for fluidd
######################################

[gcode_macro PAUSE]
rename_existing: BASE_PAUSE
#default_parameter_E: 4
gcode:
#   {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
  {% set E = params.E|default(4)|float %}
  {% set x_park = 305 %}
#   {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
  {% set y_park = 85 %}
  {% set max_z = printer.toolhead.axis_maximum.z|float %}
  {% set act_z = printer.toolhead.position.z|float %}
  {% if act_z < (max_z - 2.0) %}
      {% set z_safe = 2.0 %}
  {% else %}
      {% set z_safe = max_z - act_z %}
  {% endif %}
  SAVE_GCODE_STATE NAME=PAUSE_state
  BASE_PAUSE
  G91
  G1 E-{E} F2100
  G1 Z{z_safe} F900
  G90
  G0 X{x_park} Y{y_park} F6000
  G91


[gcode_macro RESUME]
rename_existing: BASE_RESUME
#default_parameter_E: 3      # edit to your preferred retract length
gcode:
  {% set E = params.E|default(4)|float %}
    G91
    G1 E{E} F2100
    G90
    RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
    BASE_RESUME


[gcode_macro CANCEL_PRINT]
rename_existing: BASE_CANCEL_PRINT
gcode:
    TURN_OFF_HEATERS
    CLEAR_PAUSE
    SDCARD_RESET_FILE
    BASE_CANCEL_PRINT