🚸 Firmware upload destination prompt (using Tk) (MarlinFirmware#24074)

Author: ellensp

buildroot/share/PlatformIO/scripts/upload_prompt_extra_script.py

@@ -0,0 +1,52 @@
+#
+# upload_prompt_extra_script.py
+# set the output_port
+#
+from __future__ import print_function
+
+has_tkinter = False
+try:
+	import sys
+	if sys.version_info[0] < 3:
+		import Tkinter as tk
+		import tkFileDialog as fileDialog
+		from Tkinter import Tk
+	else:
+		import tkinter as tk
+		from tkinter import Tk
+		from tkinter import filedialog as fileDialog
+	has_tkinter = True
+except:
+	pass
+
+import pioutil
+if has_tkinter and pioutil.is_pio_build():
+
+	Import("env")
+
+	def print_error(e):
+		print('\nUnable to find destination disk (%s)\n' %( e ) )
+
+	def before_upload(source, target, env):
+		#
+		# Find a disk for upload
+		#
+		upload_disk = ''
+
+		root = Tk() # pointing root to Tk() to use it as Tk() in program.
+		root.withdraw() # Hides small tkinter window.
+
+		root.attributes('-topmost', True) # Opened windows will be active. above all windows despite of selection.
+
+		upload_disk = fileDialog.askdirectory(title="Select the root of your SDCARD") # Returns opened path as str
+		if not upload_disk:
+			print_error('Canceled')
+			return
+		else:
+			env.Replace(
+				UPLOAD_FLAGS="-P$UPLOAD_PORT"
+			)
+			env.Replace(UPLOAD_PORT=upload_disk)
+			print('\nUpload disk: ', upload_disk, '\n')
+
+	env.AddPreAction("upload", before_upload)

ini/stm32f1.ini

@@ -148,6 +148,10 @@ upload_protocol = custom
 [env:STM32F103RE_creality]
 extends = STM32F103Rx_creality
 board   = genericSTM32F103RE
+extra_scripts  = ${STM32F103Rx_creality.extra_scripts}
+                 buildroot/share/PlatformIO/scripts/upload_prompt_extra_script.py
+upload_protocol = mbed
+
 
 [env:STM32F103RE_creality_xfer]
 extends = STM32F103Rx_creality_xfer
@@ -164,6 +168,9 @@ board_upload.offset_address = 0x08010000
 [env:STM32F103RC_creality]
 extends = STM32F103Rx_creality
 board   = genericSTM32F103RC
+extra_scripts  = ${STM32F103Rx_creality.extra_scripts}
+                 buildroot/share/PlatformIO/scripts/upload_prompt_extra_script.py
+upload_protocol = mbed
 
 [env:STM32F103RC_creality_xfer]
 extends = STM32F103Rx_creality_xfer