🩹 Fix manual move titles (MarlinFirmware#24518)

thinkyhead · LCh-77 · commit 0ba60118bfea · 2022-07-21T23:07:26.000-07:00
diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h
@@ -83,6 +83,7 @@ namespace Language_an {
   LSTR MSG_MOVE_X                         = _UxGT("Mover X");
   LSTR MSG_MOVE_Y                         = _UxGT("Mover Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Mover Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Mover @");
   LSTR MSG_MOVE_E                         = _UxGT("Extrusor");
   LSTR MSG_MOVE_EN                        = _UxGT("Extrusor *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Mover $mm");
diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h
@@ -72,6 +72,7 @@ namespace Language_bg {
   LSTR MSG_MOVE_X                         = _UxGT("Движение по X");
   LSTR MSG_MOVE_Y                         = _UxGT("Движение по Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Движение по Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Движение по @");
   LSTR MSG_MOVE_E                         = _UxGT("Екструдер");
   LSTR MSG_MOVE_EN                        = _UxGT("Екструдер *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Премести с $mm");
diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h
@@ -83,6 +83,7 @@ namespace Language_ca {
   LSTR MSG_MOVE_X                         = _UxGT("Mou X");
   LSTR MSG_MOVE_Y                         = _UxGT("Mou Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Mou Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Mou @");
   LSTR MSG_MOVE_E                         = _UxGT("Extrusor");
   LSTR MSG_MOVE_EN                        = _UxGT("Extrusor *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Mou $mm");
diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h
@@ -232,6 +232,7 @@ namespace Language_cz {
   LSTR MSG_MOVE_X                         = _UxGT("Posunout X");
   LSTR MSG_MOVE_Y                         = _UxGT("Posunout Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Posunout Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Posunout @");
   LSTR MSG_MOVE_E                         = _UxGT("Extrudér");
   LSTR MSG_MOVE_EN                        = _UxGT("Extrudér *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Hotend je studený");
diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h
@@ -74,6 +74,9 @@ namespace Language_da {
   LSTR MSG_MOVE_X                         = _UxGT("Flyt X");
   LSTR MSG_MOVE_Y                         = _UxGT("Flyt Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Flyt Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Flyt @");
+  LSTR MSG_MOVE_E                         = _UxGT("Flyt E");
+  LSTR MSG_MOVE_EN                        = _UxGT("Flyt *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Flyt $mm");
   LSTR MSG_MOVE_01MM                      = _UxGT("Flyt 0.1mm");
   LSTR MSG_MOVE_1MM                       = _UxGT("Flyt 1mm");
diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h
@@ -92,6 +92,7 @@ namespace Language_el {
   LSTR MSG_MOVE_X                         = _UxGT("Μετακίνηση X");
   LSTR MSG_MOVE_Y                         = _UxGT("Μετακίνηση Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Μετακίνηση Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Μετακίνηση @");
   LSTR MSG_MOVE_E                         = _UxGT("Εξωθητής");
   LSTR MSG_MOVE_EN                        = _UxGT("Εξωθητής *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Μετακίνηση %s μμ");
diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h
@@ -81,6 +81,7 @@ namespace Language_el_gr {
   LSTR MSG_MOVE_X                         = _UxGT("Μετακίνηση X");
   LSTR MSG_MOVE_Y                         = _UxGT("Μετακίνηση Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Μετακίνηση Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Μετακίνηση @");
   LSTR MSG_MOVE_E                         = _UxGT("Εξωθητήρας");
   LSTR MSG_MOVE_EN                        = _UxGT("Εξωθητήρας *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Μετακίνηση %s μμ");
diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h
@@ -226,6 +226,7 @@ namespace Language_es {
   LSTR MSG_MOVE_X                         = _UxGT("Mover X");
   LSTR MSG_MOVE_Y                         = _UxGT("Mover Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Mover Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Mover @");
   LSTR MSG_MOVE_E                         = _UxGT("Extrusor");
   LSTR MSG_MOVE_EN                        = _UxGT("Extrusor *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Hotend muy frio");
diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h
@@ -136,6 +136,7 @@ namespace Language_eu {
   LSTR MSG_MOVE_X                         = _UxGT("Mugitu X");
   LSTR MSG_MOVE_Y                         = _UxGT("Mugitu Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Mugitu Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Mugitu @");
   LSTR MSG_MOVE_E                         = _UxGT("Estrusorea");
   LSTR MSG_MOVE_EN                        = _UxGT("Estrusorea *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Mugitu $mm");
diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h
@@ -69,6 +69,7 @@ namespace Language_fi {
   LSTR MSG_MOVE_X                         = _UxGT("Liikuta X");
   LSTR MSG_MOVE_Y                         = _UxGT("Liikuta Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Liikuta Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Liikuta @");
   LSTR MSG_MOVE_E                         = _UxGT("Extruder");
   LSTR MSG_MOVE_EN                        = _UxGT("Extruder *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Liikuta $mm");
diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h
@@ -223,6 +223,7 @@ namespace Language_gl {
   LSTR MSG_MOVE_X                         = _UxGT("Mover X");
   LSTR MSG_MOVE_Y                         = _UxGT("Mover Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Mover Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Mover @");
   LSTR MSG_MOVE_E                         = _UxGT("Extrusor");
   LSTR MSG_MOVE_EN                        = _UxGT("Extrusor *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Bico moi frío");
diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h
@@ -78,6 +78,10 @@ namespace Language_hr {
   LSTR MSG_LEVEL_BED                      = _UxGT("Niveliraj bed");
   LSTR MSG_MOVE_X                         = _UxGT("Miči X");
   LSTR MSG_MOVE_Y                         = _UxGT("Miči Y");
+  LSTR MSG_MOVE_Z                         = _UxGT("Miči Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Miči @");
+  LSTR MSG_MOVE_E                         = _UxGT("Miči E");
+  LSTR MSG_MOVE_EN                        = _UxGT("Miči *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Miči $mm");
   LSTR MSG_MOVE_01MM                      = _UxGT("Miči 0.1mm");
   LSTR MSG_MOVE_1MM                       = _UxGT("Miči 1mm");
diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h
@@ -92,7 +92,9 @@ namespace Language_jp_kana {
   LSTR MSG_MOVE_X                         = _UxGT("Xジク イドウ");                  // "Move X"
   LSTR MSG_MOVE_Y                         = _UxGT("Yジク イドウ");                  // "Move Y"
   LSTR MSG_MOVE_Z                         = _UxGT("Zジク イドウ");                  // "Move Z"
+  LSTR MSG_MOVE_N                         = _UxGT("@ジク イドウ");                  // "Move @"
   LSTR MSG_MOVE_E                         = _UxGT("エクストルーダー");                // "Extruder"
+  LSTR MSG_MOVE_EN                        = _UxGT("* エクストルーダー");              // "En"
   LSTR MSG_MOVE_N_MM                      = _UxGT("$mm イドウ");                    // "Move 0.025mm"
   LSTR MSG_MOVE_01MM                      = _UxGT("0.1mm イドウ");                 // "Move 0.1mm"
   LSTR MSG_MOVE_1MM                       = _UxGT("  1mm イドウ");                 // "Move 1mm"
diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h
@@ -84,6 +84,7 @@ namespace Language_nl {
   LSTR MSG_MOVE_X                         = _UxGT("Verplaats X");
   LSTR MSG_MOVE_Y                         = _UxGT("Verplaats Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Verplaats Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Verplaats @");
   LSTR MSG_MOVE_E                         = _UxGT("Extruder");
   LSTR MSG_MOVE_EN                        = _UxGT("Extruder *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Verplaats $mm");
diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h
@@ -235,6 +235,7 @@ namespace Language_pl {
   LSTR MSG_MOVE_X                         = _UxGT("Przesuń w X");
   LSTR MSG_MOVE_Y                         = _UxGT("Przesuń w Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Przesuń w Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Przesuń w @");
   LSTR MSG_MOVE_E                         = _UxGT("Ekstruzja (os E)");
   LSTR MSG_MOVE_EN                        = _UxGT("Ekstruzja (os E) *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Dysza za zimna");
diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h
@@ -78,6 +78,7 @@ namespace Language_pt {
   LSTR MSG_MOVE_X                         = _UxGT("Mover X");
   LSTR MSG_MOVE_Y                         = _UxGT("Mover Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Mover Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Mover @");
   LSTR MSG_MOVE_E                         = _UxGT("Mover Extrusor");
   LSTR MSG_MOVE_EN                        = _UxGT("Mover Extrusor *");
   LSTR MSG_MOVE_N_MM                      = _UxGT("Mover $mm");
diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h
@@ -209,6 +209,7 @@ namespace Language_pt_br {
   LSTR MSG_MOVE_X                         = _UxGT("Mover X");
   LSTR MSG_MOVE_Y                         = _UxGT("Mover Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Mover Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Mover @");
   LSTR MSG_MOVE_E                         = _UxGT("Mover Extrusor");
   LSTR MSG_MOVE_EN                        = _UxGT("Mover Extrusor *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Extrus. mto fria");
diff --git a/Marlin/src/lcd/language/language_ro.h b/Marlin/src/lcd/language/language_ro.h
@@ -222,6 +222,7 @@ namespace Language_ro {
   LSTR MSG_MOVE_X                         = _UxGT("Move X");
   LSTR MSG_MOVE_Y                         = _UxGT("Move Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Move Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Move @");
   LSTR MSG_MOVE_E                         = _UxGT("Extruder");
   LSTR MSG_MOVE_EN                        = _UxGT("Extruder *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Capat Prea Rece");
diff --git a/Marlin/src/lcd/language/language_sv.h b/Marlin/src/lcd/language/language_sv.h
@@ -249,6 +249,7 @@ namespace Language_sv {
   LSTR MSG_MOVE_X                         = _UxGT("Flytta X");
   LSTR MSG_MOVE_Y                         = _UxGT("Flytta Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Flytta Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Flytta @");
   LSTR MSG_MOVE_E                         = _UxGT("Extruder");
   LSTR MSG_MOVE_EN                        = _UxGT("Extruder *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Hetände för kall");
diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h
@@ -225,6 +225,7 @@ namespace Language_tr {
   LSTR MSG_MOVE_X                         = _UxGT("X Hareketi");
   LSTR MSG_MOVE_Y                         = _UxGT("Y Hareketi");
   LSTR MSG_MOVE_Z                         = _UxGT("Z Hareketi");
+  LSTR MSG_MOVE_N                         = _UxGT("@ Hareketi");
   LSTR MSG_MOVE_E                         = _UxGT("Ekstruder");
   LSTR MSG_MOVE_EN                        = _UxGT("Ekstruder *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Nozul Çok Soğuk");
diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h
@@ -198,6 +198,7 @@ namespace Language_vi {
   LSTR MSG_MOVE_X                         = _UxGT("Di chuyển X");                          // Move X
   LSTR MSG_MOVE_Y                         = _UxGT("Di chuyển Y");
   LSTR MSG_MOVE_Z                         = _UxGT("Di chuyển Z");
+  LSTR MSG_MOVE_N                         = _UxGT("Di chuyển @");
   LSTR MSG_MOVE_E                         = _UxGT("Máy đùn");                              // Extruder
   LSTR MSG_MOVE_EN                        = _UxGT("Máy đùn *");
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("Đầu nóng quá lạnh");                    // Hotend too cold
diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h
@@ -222,6 +222,7 @@ namespace Language_zh_CN {
   LSTR MSG_MOVE_X                         = _UxGT("移动X");     // "Move X"
   LSTR MSG_MOVE_Y                         = _UxGT("移动Y");     // "Move Y"
   LSTR MSG_MOVE_Z                         = _UxGT("移动Z");     // "Move Z"
+  LSTR MSG_MOVE_N                         = _UxGT("移动@");     // "Move @"
   LSTR MSG_MOVE_E                         = _UxGT("挤出机");     // "Extruder"
   LSTR MSG_MOVE_EN                        = _UxGT("挤出机 *");     // "Extruder"
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("热端太冷");
diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h
@@ -218,6 +218,7 @@ namespace Language_zh_TW {
   LSTR MSG_MOVE_X                         = _UxGT("移動X");     // "Move X"
   LSTR MSG_MOVE_Y                         = _UxGT("移動Y");     // "Move Y"
   LSTR MSG_MOVE_Z                         = _UxGT("移動Z");     // "Move Z"
+  LSTR MSG_MOVE_N                         = _UxGT("移動Q");     // "Move @"
   LSTR MSG_MOVE_E                         = _UxGT("擠出機");     // "Extruder"
   LSTR MSG_MOVE_EN                        = _UxGT("擠出機 *");       // "Extruder *"
   LSTR MSG_HOTEND_TOO_COLD                = _UxGT("噴嘴溫度不夠");   // "Hotend too cold"
diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h
@@ -178,6 +178,8 @@ typedef bool (*statusResetFunc_t)();
     static void soon(const AxisEnum axis OPTARG(MULTI_E_MANUAL, const int8_t eindex=active_extruder));
   };
 
+  void lcd_move_axis(const AxisEnum);
+
 #endif
 
 ////////////////////////////////////////////
diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp
@@ -191,7 +191,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co
         else {
           #if ENABLED(MOVE_Z_WHEN_IDLE)
             ui.manual_move.menu_scale = MOVE_Z_IDLE_MULTIPLICATOR;
-            screen = lcd_move_z;
+            screen = []{ lcd_move_axis(Z_AXIS); };
           #endif
         }
       }
diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h
@@ -214,8 +214,6 @@ void menu_move();
 //////// Menu Item Helper Functions ////////
 ////////////////////////////////////////////
 
-void lcd_move_axis(const AxisEnum);
-void lcd_move_z();
 void _lcd_draw_homing();
 
 #define HAS_LINE_TO_Z ANY(DELTA, PROBE_MANUALLY, MESH_BED_LEVELING, LCD_BED_TRAMMING)
diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
@@ -52,7 +52,7 @@ void _man_probe_pt(const xy_pos_t &xy) {
     ui.wait_for_move = false;
     ui.synchronize();
     ui.manual_move.menu_scale = _MAX(PROBE_MANUALLY_STEP, MIN_STEPS_PER_SEGMENT / planner.settings.axis_steps_per_mm[0]); // Use first axis as for delta XYZ should always match
-    ui.goto_screen(lcd_move_z);
+    ui.goto_screen([]{ lcd_move_axis(Z_AXIS); });
   }
 }
 
diff --git a/Marlin/src/lcd/menu/menu_item.h b/Marlin/src/lcd/menu/menu_item.h
@@ -31,8 +31,6 @@
   #include "../../module/planner.h"
 #endif
 
-void lcd_move_z();
-
 ////////////////////////////////////////////
 ///////////// Base Menu Items //////////////
 ////////////////////////////////////////////
diff --git a/Marlin/src/lcd/menu/menu_motion.cpp b/Marlin/src/lcd/menu/menu_motion.cpp
@@ -74,6 +74,7 @@ void lcd_move_axis(const AxisEnum axis) {
   }
   ui.encoderPosition = 0;
   if (ui.should_draw()) {
+    MenuEditItemBase::itemIndex = axis;
     const float pos = ui.manual_move.axis_value(axis);
     if (parser.using_inch_units()) {
       const float imp_pos = LINEAR_UNIT(pos);
@@ -84,9 +85,6 @@ void lcd_move_axis(const AxisEnum axis) {
   }
 }
 
-// Move Z easy accessor
-void lcd_move_z() { lcd_move_axis(Z_AXIS); }
-
 #if E_MANUAL
 
   static void lcd_move_e(TERN_(MULTI_E_MANUAL, const int8_t eindex=active_extruder)) {
@@ -118,7 +116,7 @@ void lcd_move_z() { lcd_move_axis(Z_AXIS); }
 
   void _goto_manual_move_z(const_float_t scale) {
     ui.manual_move.menu_scale = scale;
-    ui.goto_screen(lcd_move_z);
+    ui.goto_screen([]{ lcd_move_axis(Z_AXIS); });
   }
 
 #endif

Original file line number	Diff line number	Diff line change
`@@ -191,7 +191,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/=0/, co`
`191`	`191`	`else {`
`192`	`192`	`#if ENABLED(MOVE_Z_WHEN_IDLE)`
`193`	`193`	`ui.manual_move.menu_scale = MOVE_Z_IDLE_MULTIPLICATOR;`
`194`		`- screen = lcd_move_z;`
	`194`	`+ screen = []{ lcd_move_axis(Z_AXIS); };`
`195`	`195`	`#endif`
`196`	`196`	`}`
`197`	`197`	`}`
Original file line number	Diff line number	Diff line change
`@@ -52,7 +52,7 @@ void _man_probe_pt(const xy_pos_t &xy) {`
`52`	`52`	`ui.wait_for_move = false;`
`53`	`53`	`ui.synchronize();`
`54`	`54`	`ui.manual_move.menu_scale = _MAX(PROBE_MANUALLY_STEP, MIN_STEPS_PER_SEGMENT / planner.settings.axis_steps_per_mm[0]); // Use first axis as for delta XYZ should always match`
`55`		`- ui.goto_screen(lcd_move_z);`
	`55`	`+ ui.goto_screen([]{ lcd_move_axis(Z_AXIS); });`
`56`	`56`	`}`
`57`	`57`	`}`
`58`	`58`
Original file line number	Diff line number	Diff line change
`@@ -74,6 +74,7 @@ void lcd_move_axis(const AxisEnum axis) {`
`74`	`74`	`}`
`75`	`75`	`ui.encoderPosition = 0;`
`76`	`76`	`if (ui.should_draw()) {`
	`77`	`+ MenuEditItemBase::itemIndex = axis;`
`77`	`78`	`const float pos = ui.manual_move.axis_value(axis);`
`78`	`79`	`if (parser.using_inch_units()) {`
`79`	`80`	`const float imp_pos = LINEAR_UNIT(pos);`
`@@ -84,9 +85,6 @@ void lcd_move_axis(const AxisEnum axis) {`
`84`	`85`	`}`
`85`	`86`	`}`
`86`	`87`
`87`		`-// Move Z easy accessor`
`88`		`-void lcd_move_z() { lcd_move_axis(Z_AXIS); }`
`89`		`-`
`90`	`88`	`#if E_MANUAL`
`91`	`89`
`92`	`90`	`static void lcd_move_e(TERN_(MULTI_E_MANUAL, const int8_t eindex=active_extruder)) {`
`@@ -118,7 +116,7 @@ void lcd_move_z() { lcd_move_axis(Z_AXIS); }`
`118`	`116`
`119`	`117`	`void _goto_manual_move_z(const_float_t scale) {`
`120`	`118`	`ui.manual_move.menu_scale = scale;`
`121`		`- ui.goto_screen(lcd_move_z);`
	`119`	`+ ui.goto_screen([]{ lcd_move_axis(Z_AXIS); });`
`122`	`120`	`}`
`123`	`121`
`124`	`122`	`#endif`